Configuration
Version 2 (Ilario Gelmetti, 10/27/2015 04:14 pm)
| 1 | 1 | Ilario Gelmetti | h1. Configuration of Libre-Mesh |
|---|---|---|---|
| 2 | 1 | Ilario Gelmetti | |
| 3 | 2 | Ilario Gelmetti | Up to now the best documentation available for configuring Libre-Mesh is contained in the comments of the "/etc/config/lime file":https://raw.githubusercontent.com/libre-mesh/lime-packages/develop/packages/lime-system/files/etc/config/lime . |
| 4 | 2 | Ilario Gelmetti | |
| 5 | 1 | Ilario Gelmetti | h2. Pre-Compilation Configuration |
| 6 | 1 | Ilario Gelmetti | |
| 7 | 1 | Ilario Gelmetti | For producing a pre-configured a Libre-Mesh firmware image you can customize this file in the compilation directory: |
| 8 | 1 | Ilario Gelmetti | |
| 9 | 1 | Ilario Gelmetti | <pre> |
| 10 | 1 | Ilario Gelmetti | feeds/lime/packages/lime-system/files/etc/config/lime-defaults |
| 11 | 1 | Ilario Gelmetti | </pre> |
| 12 | 1 | Ilario Gelmetti | |
| 13 | 1 | Ilario Gelmetti | |
| 14 | 1 | Ilario Gelmetti | h2. Post-Flashing Configuration |
| 15 | 1 | Ilario Gelmetti | |
| 16 | 1 | Ilario Gelmetti | For modifying the configuration of a running Libre-Mesh node you can modify this file after logging in the router: |
| 17 | 1 | Ilario Gelmetti | |
| 18 | 1 | Ilario Gelmetti | <pre> |
| 19 | 1 | Ilario Gelmetti | /etc/config/lime |
| 20 | 1 | Ilario Gelmetti | </pre> |